Publications of 2014

Book
Andreas Marn AdMoNt-Zwischenbericht 1 Publikation in PURE anzeigen
Martin Rieger Druckversuche an (langen) Stützen - Ermittlung von Knicklängen Publikation in PURE anzeigen
Martin Rieger Biegeversuche an Trägeranschlüssen Publikation in PURE anzeigen
Martin Rieger Ermittlung des Anschlussspiels an einer Anschlusslasche Publikation in PURE anzeigen
Martin Rieger Scherversuche an Trägeranschlusslaschen und Sicherungselementen Publikation in PURE anzeigen
Martin Rieger Prüfungen an Stützenfußboden-Verbindungen Publikation in PURE anzeigen
Martin Rieger Ermittlung der Schubsteifigkeit von Ständerrahmen Publikation in PURE anzeigen
Martin Rieger Biegeversuche an Stützenprofilen Publikation in PURE anzeigen
Martin Rieger Prüfungen an Stützenstößen Publikation in PURE anzeigen
Martin Rieger Biegeversuche an Trägern Publikation in PURE anzeigen
Martin Rieger Druckversuch am kurzen Stützenstück Publikation in PURE anzeigen
Beitrag in Fachzeitschrift
Nikolaus Euler-Rolle, Stefan Jakubek and Günter Offner Model order reduction by projection applied to the universal Reynold’s equation Publikation in PURE anzeigen
J. Haslinger, Günter Offner and M. Sopouch Non-Smooth Dynamics of Coil Contact in Valve Springs Publikation in PURE anzeigen
Rosario Spataro, Emil Göttlich, Davide Lengani, Christian Faustmann and Franz Heitmeir Development of a Turning Mid Turbine Frame With Embedded Design - Part I: Design and Steady Measurements Publikation in PURE anzeigen
Davide Lengani, Stefan Kindermann, Thorsten Selic, Andreas Marn and Franz Heitmeir Measurement and Decomposition of Periodic Flow Structures of a Test Turbine Publikation in PURE anzeigen
C. Heschl, K. Inthavong, Wolfgang Sanz and J. Tu Non-linear Eddy Viscosity Modelling and Experimental Study of Jet Spreading Rates Publikation in PURE anzeigen
Maximilian Schrittwieser, Andreas Marn, Ernst Farnleitner and Gebhard Kastner Numerical Analysis of Heat Transfer and Flow of Stator Duct Models Publikation in PURE anzeigen
Rosario Spataro, Emil Göttlich, Davide Lengani, Christian Faustmann and Franz Heitmeir Development of a Turning Mid Turbine Frame With Embedded Design - Part II: Unsteady Measurements Publikation in PURE anzeigen
Adam D Wexler, M.L. Sáenz, O. Schreer, Jakob Woisetschläger and E C Fuchs The Preparation of Electrohydrodynamic Bridges from Polar Dielectric Liquids Publikation in PURE anzeigen
Tagungsbeitrag
Herbert Jericha and Emil Göttlich Verbesserte Nutzung der Windkraft durch Anordnung neuartiger Windturbinen auf Bergen und GewässernInnehalten und Ausblick: Effektivität und Effizienz für die Energiewende354-355 Publikation in PURE anzeigen
Pascal Bader, Wolfgang Sanz, Rosario Spataro and Emil Göttlich Flow evolution through a Turning Mid Turbine Frame with embedded designTurbomachinery1-13 Publikation in PURE anzeigen
Christian Faustmann and Emil Göttlich Aerodynamics and Acoustics of Turning Mid Turbine Frames in a Two-Shaft Test TurbineProceedings of the ASME Turbo Expo25568-1-25568-16 Publikation in PURE anzeigen
M. Rainer, Gundolf Haase, B. Basara and Günter Offner Steady Shape Optimization by a Continuous Adjoint Solver using Turbulence Models in the Adjoint EquationsProceedings of the 1st Conference on Engineering and Applied Sciences Optimization2513-2524 Publikation in PURE anzeigen
Andreas Marn, Dominik Broszat, Thorsten Selic, Florian Schönleitner and Franz Heitmeir Comparison of the Aerodynamics of Acoustically Designed EGVs and a State-of-the-Art EGVASME Turbo Expo1-12 Publikation in PURE anzeigen
Oliver Borm Evaluation of Gaseous Emissions From Hydrogen Combustion Aircraft EnginesASME Turbo Expo 2014: Turbine Technical Conference and Exposition1-11 Publikation in PURE anzeigen
Mirko Spitalny, Ulf Tapken, Christian Faustmann and Lars Enghardt Radial mode decomposition of sound fields in flow ducts under consideration of a rigid body like swirlInternational Conference on Noise and Vibration Engineering0-0 Publikation in PURE anzeigen
Wolfgang Sanz and Herbert Jericha Renewable Power via Energy Ship and Graz CycleInternational Symposium on Transport Phenomena and Dynamics of Rotating Machinery000-000 Publikation in PURE anzeigen
Michael Steiner, Emil Göttlich, Rosario Spataro and Franz Heitmeir Experimental investigation of a vortex-generator-controlled intermediate turbine duct under the influence of rotating wakes32nd AIAA Applied Aerodynamics Conference1-12 Publikation in PURE anzeigen
Thorsten Selic, Davide Lengani, Dominik Broszat, Florian Schönleitner and Andreas Marn Comparison of a State of the Art and a High Stage Loading RotorProceedings of the ASME Turbo Expo 1-12 Publikation in PURE anzeigen
Mehmet Bugra Akin, Wolfgang Sanz and Paul Pieringer Endwall Contour Optimization of a Turning Mid Turbine Frame Using an Adjoint MethodASME Turbo Expo26038-1-26038- Publikation in PURE anzeigen
Günter Offner and O. Knaus A Generic Friction Model for Radial Slider Bearing SimulationÖTG-Symposium0-0 Publikation in PURE anzeigen
Christian Faustmann, Stefan Zerobin, Andreas Marn, Mirko Spitalny, Dominik Broszat and Emil Göttlich Noise generation and propagation for different turning mid turbine frame setups in a two shaft test turbine20th AIAA/CEAS Aeroacoustics Conference 20141888811-1-1888811-16 Publikation in PURE anzeigen
Heidemarie Malli, Kurt Felix Eckerstorfer, Oliver Borm and Peter Adrian Leitl Experimental and Numerical Investigation of a Hydrogen Combustion Chamber Under Various Inlet ConditionsProceedings of ASME Turbo Expo 2014: Turbine Technical Conference and Exposition1-11 Publikation in PURE anzeigen
Johannes Peterleithner, Florian Salcher and Jakob Woisetschläger Frequency resolved interferometric detection of local density fluctuations in flamesProceedings 17th International Symposium on Application of Laser Techniques to Fluid Mechanics04.7_1_53-04.7_1_53 Publikation in PURE anzeigen
Thorsten Selic and Andreas Marn On the Influence of Rotor Design on an Acoustically 3d-Designed Turbine Exit Guide VaneAIAA/CEAS Aeroacoustics Conference1-11 Publikation in PURE anzeigen
Christian Faustmann, Sabine Bauinger, Andreas Marn and Emil Göttlich The effect of airfoil clocking on noise generation and propagation in a two shaft test turbine20th AIAA/CEAS Aeroacoustics Conference 20141887191-1-1887191-13 Publikation in PURE anzeigen
N. Lorenz, Günter Offner and O. Knaus Fast Thermo-elasto-hydrodynamic Modelling Approach for Mixed Lubricated Journal Bearings in ICEsLeeds-Lyon Symposium on Tribology21.1-105 Publikation in PURE anzeigen
Florian Schönleitner, Helge Koch, Thorsten Selic, Martin Höger and Andreas Marn Comparison of the experimental results between a 2D EGV cascade test and a rig test under engine representative conditionsASME Turbo Expo1-15 Publikation in PURE anzeigen
Mehmet Bugra Akin and Wolfgang Sanz Numerical Investigation of a Two-Stage Counter-Rotating Turbine With Transition Modelling and Prediction Improvement With Time-Accurate CalculationsInternational ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements0-0 Publikation in PURE anzeigen
Mehmet Bugra Akin and Wolfgang Sanz The Influence of Transition on CFD Calculations of a Two-Stag Counter-Rotating TurbineASME Turbo Expo26044-1-26044-14 Publikation in PURE anzeigen
D. Martin, G. Haase and Günter Offner Interpolation with Radial Basis Functions on GPGPUs using CUDAInterpolation with Radial Basis Functions on GPGPUs using CUDA0-0 Publikation in PURE anzeigen
Abschlussarbeit
Pascal Bader Steady And Unsteady CFD Simulation Of A Two-Stage Turbine With A Turning Mid Turbine Frame Publikation in PURE anzeigen
Stefan Zerobin Akustische Untersuchung von Turbinenübergangskanälen bei drei verschiedenen Betriebspunkten Publikation in PURE anzeigen
Sonstiger Beitrag
Pascal Bader, Wolfgang Sanz, Rosario Spataro and Emil Göttlich Flow Evolution Through A Turning Mid Turbine Frame With Embedded Design Publikation in PURE anzeigen
Markus Justl, Lukas Maria Traußnig, Florian Schönleitner, Andreas Marn and Franz Heitmeir Numerical investigation regarding contact modeling for evaluating the modal characteristics of a low pressure turbine rotor Publikation in PURE anzeigen
Christian Faustmann, Stefan Zerobin and Franz Heitmeir Experimental Investigation of the Noise Generation and Propagation for a Turning Mid Turbine Frame Publikation in PURE anzeigen
Thorsten Selic and Andreas Marn On the Influence of Rotor Design on an Acoustically 3d-Designed Turbine Exit Guide Vane Publikation in PURE anzeigen
Florian Schönleitner, Lukas Maria Traußnig, Markus Justl and Andreas Marn Evaluation of the modal characteristics of a low pressure turbine rotor. A comparison between different experimental and numerical methods. Publikation in PURE anzeigen
Florian Schönleitner, Helge Koch, Thorsten Selic, Martin Höger and Andreas Marn Comparison of the experimental results between a 2D EGV cascade test and a rig test under engine representative conditions Publikation in PURE anzeigen
Sabine Bauinger, Christian Faustmann and Franz Heitmeir Investigation on Noise Generation and Propagation for Different Vane-Vane Positions in a Two-Stage Two-Spool Test Turbine Publikation in PURE anzeigen
Andreas Marn, Dominik Broszat, Thorsten Selic, Florian Schönleitner and Franz Heitmeir Comparison of the Aerodynamics of Acoustically Designed EGVs and a State-of-the-Art EGV Publikation in PURE anzeigen
Andreas Marn, Franco Pichler, Thorsten Selic and Florian Schönleitner Blade-Disc Connection Parameter Variation Publikation in PURE anzeigen
Thorsten Selic, Davide Lengani, Dominik Broszat, Florian Schönleitner and Andreas Marn Comparison of a State of the Art and a High Stage Loading Rotor Publikation in PURE anzeigen

To top

Contact
image/svg+xml

Institute of Thermal Turbomachinery and Machine Dynamics

Graz University of Technology
Inffeldgasse 25/A
A-8010 Graz

Tel: +43 (0)316 873 - 7226
Fax: +43 (0)316 873 - 107226
ttmnoSpam@tugraz.at