Book
Christian Schlacher Kriech-und Schädigungsuntersuchungen von Schweißverbindungen eines neuentwickelten Chromstahls3851254075 Publikation in PURE anzeigen
Buchkapitel
Christof Sommitsch and Bruno Hribernik Foreword8th European Stainless Steel and Duplex Stainless Steel Conference 2015
Alternativer Link: Link Publikation in PURE anzeigen
Beitrag in Fachzeitschrift
Andreas Hütter, Wilfried Huemer, Claudia Ramskogler, Fernando Gustavo Warchomicka, Aymen Lachehab, Rudolf Vallant and Christof Sommitsch Surface Modification of pure magnesium and magnesium alloy by Friction Stir Processing Key Engineering Materials 651-653, 796-801, 2015
DOI: https://doi.org/10.4028/www.scientific.net/KEM.651-653.796 Publikation in PURE anzeigen
Christian Schlacher, Tanja Pelzmann, Coline Beal, Christof Sommitsch, Chiradeep Gupta, Hiroyuki Toda and Peter Mayr Investigation of creep damage in advanced martensitic chromium steel weldments using synchrotron X-ray micro-tomography and EBSD Materials Science and Technology 31, 516-521, 2015
DOI: https://doi.org/10.1179/1743284714Y.0000000621 Publikation in PURE anzeigen
John W. Gibbs, Christian Schlacher, Peter Mayr, Patricio F. Mendez and Ata Kamyabi-Gol Cooling curve analysis as an alternative to dilatometry in continuous cooling transformations Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 46, 148-155, 2015
DOI: https://doi.org/10.1007/s11661-014-2603-8 Publikation in PURE anzeigen
Pere Barriobero-Vila, Guillermo Requena, Fernando Gustavo Warchomicka, Andreas Stark, Norbert Schell and Thomas Buslaps Phase transformation kinetics during continuous heating of a β-quenched Ti–10V–2Fe–3Al alloy Journal of Materials Science 50, 1412-1426, 2015
DOI: https://doi.org/10.1007/s10853-014-8701-6
Alternativer Link: Link Publikation in PURE anzeigen
Katharina Steineder, Martina Dikovits, Coline Beal, Christof Sommitsch, Daniel Krizan and Reinhold Schneider Hot deformation behavior of a 3rd generation advanced high strength steel with a Medium-Mn content Key Engineering Materials 651-653, 120-125, 2015
DOI: https://doi.org/10.4028/www.scientific.net/KEM.651-653.120 Publikation in PURE anzeigen
C. Gupta, H. Toda, Peter Mayr and Christof Sommitsch 3D creep cavitation characteristics and residual life assessment in high temperature steels: a critical review Materials Science and Technology 31, 603-626, 2015
DOI: https://doi.org/DOI 10.1179/1743284714Y.0000000693 Publikation in PURE anzeigen
Katharina Steineder, Reinhold Schneider, Daniel Krizan, Coline Beal and Christof Sommitsch Investigation on the microstructural evolution in a Medium-Mn steel (X10Mn5) after intercritical annealing HTM - Journal of Heat Treatment and Materials 70, 19-25, 2015
DOI: https://doi.org/10.3139/105.110248 Publikation in PURE anzeigen
Surya Deo Yadav, Bernhard Sonderegger, Bernhard Sartory, Christof Sommitsch and Maria Cecilia Poletti Characterisation and quantification of cavities in 9Cr martensitic steel for power plants Materials Science and Technology 31, 554-564, 2015
DOI: https://doi.org/10.1179/1743284714Y.0000000635 Publikation in PURE anzeigen
Dominik Leidinger, Bernd Holper and Christof Sommitsch Construction of a Corrosion Test Chamber for the Installation in a Rotating Bending Machine for Corrosion Fatigue Tests of Cr-Mn-N Austenitic Steels Used in the Oil-field Industry Berg- und hüttenmännische Monatshefte 160 Jg., 419-425, 2015
DOI: https://doi.org/10.1007/s00501-015-0412-z Publikation in PURE anzeigen
M. Pourbashiri, M. Sedighi, Maria Cecilia Poletti and Christof Sommitsch Microstructure Evolution and Hardness Distribution in Al Wires Subjected to Simultaneous Tension-Torsion Deformation Key Engineering Materials 651-653, 771-776, 2015
DOI: https://doi.org/10.4028/www.scientific.net/KEM.651-653.771 Publikation in PURE anzeigen
Christof Großegger, Claus Lochbichler, Rudolf Vallant and Norbert Enzinger Vergleich einer artfremden Schweißung von Nickelbasislegierungen mittels Elektronenstrahl- und Elektrodenhandschweißen Schweiss- & Prüftechnik , 48-50, 2015 Publikation in PURE anzeigen
Katharina Steineder, Reinhold Schneider, Daniel Krizan, Coline Beal and Christof Sommitsch Comparative Investigation of Phase Transformation Behavior as a Function of Annealing Temperature and Cooling Rate of Two Medium-Mn Steels Steel Research International 85, 1-8, 2015
DOI: https://doi.org/10.1002/srin.201400551 Publikation in PURE anzeigen
Martina Dikovits and Maria Cecilia Poletti Study of the Hot Deformation Behaviour of Metalbased Alloys with Reference to Processing Maps Berg- und hüttenmännische Monatshefte 160, 333-336, 2015
DOI: https://doi.org/10.1007/s00501-015-0368-z Publikation in PURE anzeigen
Hans Clement, Christoph Zopf, Markus Brandner, Norbert P. Tesch, Rudolf Vallant and Paul Puchwein Performance test of different 3.5mm drill bits and consequences for orthopaedic surgery Archives of Orthopaedic and Trauma Surgery 10, 1-8, 2015
DOI: https://doi.org/10.1007/s00402-015-2338-z
Alternativer Link: Link Publikation in PURE anzeigen
Pere Barriobero-Vila, Guillermo Requena, Sabine Schwarz, Fernando Gustavo Warchomicka and Thomas Buslaps Influence of phase transformation kinetics on the formation of α in a β-quenched Ti-5Al-5Mo-5V-3Cr-1Zr alloy Acta Materialia 95, 90-101, 2015
DOI: https://doi.org/10.1016/j.actamat.2015.05.008
Alternativer Link: Link Publikation in PURE anzeigen
Yu Huan, Xiaohui Wang, Longtu Li and Jurij Koruza Strong domain configuration dependence of the nonlinear dielectric response in (K,Na)NbO3-based ceramics Applied Physics Letters 107, 2015
DOI: https://doi.org/10.1063/1.4936165
Alternativer Link: Link Publikation in PURE anzeigen
Azatuhi Ayrikyan, Virginia Rojas, Leopoldo Molina-Luna, Matias Acosta, Jurij Koruza and Kyle G. Webber Enhancing electromechanical properties of lead-free ferroelectrics with bilayer ceramic/ceramic composites IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control 62, 997-1006, 2015
DOI: https://doi.org/10.1109/TUFFC.2014.006673
Alternativer Link: Link Publikation in PURE anzeigen
Piotr MACIOŁ, Romain Bureau, Maria Cecilia Poletti, Christof Sommitsch, Piotr WARCZOK and Ernst Kozeschnik Agile multiscale modelling of the thermo-mechanical processing of an aluminium alloy Key Engineering Materials 651-653, 1319-1324, 2015
DOI: https://doi.org/10.4028/www.scientific.net/KEM.651-653.1319 Publikation in PURE anzeigen
Andreas Hütter, Wilfried Huemer, Claudia Ramskogler, Fernando Gustavo Warchomicka, Aymen Lachehab and Rudolf Vallant Surface Modification of pure magnesium and magnesium alloy AZ91 by Friction Stir Processing Key Engineering Materials 651-653, 796-801, 2015
DOI: https://doi.org/10.4028/www.scientific.net/KEM.651-653.796 Publikation in PURE anzeigen
Johannes Tändl, Shoichi Nambu, Angelina Orthacker, Gerald Kothleitner, Junya Inoue, Toshihiko Koseki and Maria Cecilia Poletti In-situ observation of recrystallization in an AlMgScZr alloy using confocal laser scanning microscopy Materials Characterization 108, 137-144, 2015 Publikation in PURE anzeigen
Philipp Stögmüller, Andreas Hinterer, Friedrich Pesendorfer and Norbert Enzinger Adhesice tensile testing of atmospheric plasma sprayed zinc coating on a 1.4301 substrate MP Materials Testing 57, 717-722, 2015
DOI: https://doi.org/10.3139/120.110770 Publikation in PURE anzeigen
Surya Deo Yadav, P. P. Bhingole, G. P. Chaudhari, S.K. Nath and Christof Sommitsch Hybrid processing of AZ91 Magnesium alloy/nano-Al2O3 composites Key Engineering Materials 651-653, 783-788, 2015
DOI: https://doi.org/10.4028/www.scientific.net/KEM.651-653.783 Publikation in PURE anzeigen
A. H. Jabbari, M. Sedighi, Rudolf Vallant, Andreas Hütter and Christof Sommitsch Effect of Pass Number, Rotational and Traverse Speed on Particle Distribution and Microstructure of AZ31/SiC Composite Produced by Friction Stir Processing Key Engineering Materials 651-653, 765-770, 2015
DOI: https://doi.org/10.4028/www.scientific.net/KEM.651-653.765 Publikation in PURE anzeigen
Ernst Plesiutschnig, Rudolf Vallant, Gernot Stöfan, Christof Sommitsch, Mathias Mayr, Andreas Marn and Franz Heitmeir Cracks on the Roots of Turbine Blades of the Low-Pressure Turbine in a Steam Power Plant Praktische Metallographie/Practical Metallography 52, 214-225, 2015
DOI: https://doi.org/10.3139/147.110318
Alternativer Link: Link Publikation in PURE anzeigen
Ernst Plesiutschnig, Coline Beal, Stefan Paul, Günter Zeiler and Christof Sommitsch Optimized microstructure for an increased creep rupture strength of MarBN steels Materials at High Temperatures 32, 318-322, 2015
DOI: https://doi.org/10.1179/0960340914Z.00000000073
Alternativer Link: Link Publikation in PURE anzeigen
Dilek Halici and Maria Cecilia Poletti Flow localization modelling in Ti alloys and Ti matrix composites Key Engineering Materials 651-653, 3-8, 2015 Publikation in PURE anzeigen
Horst-Hannes Cerjak, Norbert Enzinger and Milan Pudar Development, experience and qualification of steel grades for hydropower conduits VGB PowerTech , 82-86, 2015 Publikation in PURE anzeigen
Wilhelm Maurer, Wolfgang Ernst, Rudolf Rauch, Rudolf Vallant and Norbert Enzinger Evaluation of the factors influencing the strength of HSLA steel weld joint with softened HAZ Welding in the World , 1-14, 2015
DOI: https://doi.org/10.1007/s40194-015-0262-z Publikation in PURE anzeigen
Horst-Hannes Cerjak, Norbert Enzinger and Milan Pudar Entwicklungen, Erfahrungen und Qualifikation von Stählen für Wasserkraftwerke Wasserwirtschaft , 109-113, 2015
DOI: https://doi.org/10.1007/s35147-015-0527-x
Alternativer Link: Link Publikation in PURE anzeigen
Christian Schlacher, Coline Beal, Christof Sommitsch, Stefan Mitsche and Peter Mayr Creep and damage investigation of advanced martensitic chromium steel weldments for high temperature applications in thermal power plants Science and Technology of Welding and Joining 20, 82-90, 2015
DOI: https://doi.org/10.1179/1362171814Y.0000000259 Publikation in PURE anzeigen
Susanne Baumgartner, Monika Schuler, A. Holy, Ronald Schnitzer and Norbert Enzinger Dissimilar welding of the creep resistant steels CB2 and P92 with flux cored wires Welding in the World 59, 655-665, 2015
DOI: https://doi.org/10.1007/s40194-015-0241-4 Publikation in PURE anzeigen
Z. Gao, P. Wang, D. Cheng, J. Niu and Christof Sommitsch Numerical Simulation of Material Flow in AA6082 During Friction Stir Spot Welding Engineering Review Vol. 35, 283-289, 2015 Publikation in PURE anzeigen
Tagungsbeitrag
Andreas Drexler Yield stress evolution in Inconel 718 samples under standard heat treatment process conditions of turbine disksEuropean Conference on Heat Treatment 2015 and 22nd IFHTSE Congress Publikation in PURE anzeigen
Peter Mayr, Alexander Nitsche and Christian Schlacher Einfluss unterschiedlicher Schweißverfahren auf Mikro-struktur und Zeitstandverhalten eines borlegierten 9Cr StahlsLangzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe Publikation in PURE anzeigen
W. Huemer, C. Hahn, A. Hütter, R. Valiant and C. Sommitsch Improvement of the corrosion behaviour of AZ91 via friction stir processingEuropean Corrosion Congress, EUROCORR 20151156-1165
Alternativer Link: Link Publikation in PURE anzeigen
Florian Pyczak, Marcus Rackel, Heike Gabrisch, Uwe Lorenz, Andreas Schreyer, Dilek Halici and Andreas Stark In-situ monitoring of thermal treatments and hot deformation of a γ-TiAl alloy by high energy X-Ray diffractionHiMAT-2015 Publikation in PURE anzeigen
Alice Orsi, Yassar Ghanimi and Norbert Enzinger Sulphide stress corrosion cracking of 1.4418 welded plates8th European Stainless Steel & Duplex Stainless Steel Conference 2015357-366 Publikation in PURE anzeigen
Maria Cecilia Poletti, Dilek Halici and Song Xue Flow instabilities during hot deformation of titanium alloys and titanium matrix compositesTMS Proceeding Publikation in PURE anzeigen
Christian Schlacher, Martina Dikovits, Christof Sommitsch and Peter Mayr Creep and damage investigations of MARBN welded jointsAdvanced High-Temperature Materials Technology for Sustainable and Reliable Power Engineering Publikation in PURE anzeigen
Angelina Orthacker, Georg Haberfehlner, Johannes Tändl, Maria Cecilia Poletti and Gerald Kothleitner Analytical Electron Tomographic Investigation of an Aluminium Alloy with Nano-PrecipitatesASEM Workshop Advanced Electron Microscopy39-39 Publikation in PURE anzeigen
Ozan Caliskanoglu, Sabine Zamberger, Coline Beal and Christof Sommitsch Effect of Melting on the Hot Ductility of Continuously Cast SteelsThe 6th International Congress on the Science and Technology of Steelmaking (ICS2015)512-515
Alternativer Link: Link Publikation in PURE anzeigen
Claudia Ramskogler, Fernando Gustavo Warchomicka, Christof Sommitsch, Sepideh Mostofi and Annelie Weinberg Surface structuring by electron beam technique in titanium grade 2 and Ti6Al4V for biomedical applicationSurface structuring by electron beam technique in titanium grade 2 and Ti6Al4V for biomedical application Publikation in PURE anzeigen
Ernst Plesiutschnig, Christof Sommitsch, Günter Zeiler and Stefan Paul Ferritische Phasenumwandlung zur Verbesserung der Kriecheigenschaften von martensitischen 9 - 13 % Cr Stählen38. Vortragsveranstaltung Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe1-8 Publikation in PURE anzeigen
Horst-Hannes Cerjak, Ozan Caliskanoglu, Norbert Enzinger, Gunter Figner and Milan Pudar Versprödung von hochfestem Schweißgut beim SpannungsarmglühenDVS Congress 2015824-827 Publikation in PURE anzeigen
Gerald Trummer, Christof Marte, S. Scheriau, Peter Dietmaier, Christof Sommitsch and Klaus Six Modeling wear and rolling contact fatigue: Parametric study and experimental resultsInternational Conference on Contact Mechanics and Wear of Rail/Wheel Systems1-8 Publikation in PURE anzeigen
Abschlussarbeit
Dilek Halici Damage analysis in a gamma TiAl alloy during hot working Publikation in PURE anzeigen
Christian Höller Technical and Economic Analysis of the Process of Surgical Bone Drilling and Improvement Potentials
Alternativer Link: Link Publikation in PURE anzeigen
Christian Schlacher Untersuchung des Kriech- und Schädigungsverhaltens von Schweißverbindungen eines martensitischen borlegierten 9 % Cr-Stahls Publikation in PURE anzeigen
Sonstiger Beitrag
Christian Markus Voglreiter, Markus Stütz and Norbert Enzinger Filler Material Insertion for Electron Beam Welding of Thick Walled Copper Components Publikation in PURE anzeigen
Romain Bureau, Maria Cecilia Poletti and Christof Sommitsch Modelling the flow stress of aluminum alloys during hot and cold deformation
Alternativer Link: Link Publikation in PURE anzeigen
Christopher Alois Wiednig, Florian Stiefler and Norbert Enzinger Influence of Surface Roughness in Electron Beam Welding
Alternativer Link: Link Publikation in PURE anzeigen
Dilek Halici and Maria Cecilia Poletti Flow localization modelling in Ti alloys and Ti matrix composites Publikation in PURE anzeigen
Bernhard Krenmayr, Monika Schuler and Norbert Enzinger Improved evaluation of the instrumented Charpy V-notch test
Alternativer Link: Link Publikation in PURE anzeigen
Angelina Orthacker, Georg Haberfehlner, Johannes Tändl, Maria Cecilia Poletti and Gerald Kothleitner Analytical Electron Tomographic Investigation of an Aluminium Alloy with Nano-Precipitates Publikation in PURE anzeigen
Angelina Orthacker, Georg Haberfehlner, Johannes Tändl and Gerald Kothleitner Analytical Electron Tomographic Investigation of Aluminium Alloys with Nano-Precipitates Publikation in PURE anzeigen
Ernst Plesiutschnig and Christof Sommitsch Ferritische Phasenumwandlung zur Verbesserung der Kriecheigenschaften von martensitischen 9 - 13 % Cr Stählen
Alternativer Link: Link Publikation in PURE anzeigen
Susanne Baumgartner, A. Holy, Monika Schuler, Ronald Schnitzer and Norbert Enzinger Effect of Annealing Time on the Mechanical Properties of P91 Flux Cored Wire Weld Metal Publikation in PURE anzeigen
Bernadette Gsellmann, Wilfried Huemer, Rudolf Vallant and Christof Sommitsch CORROSION RESISTANCE OF LINEAR FRICTION WELDED CHAIN LINKS Publikation in PURE anzeigen
Marcus W. Rackel, Andreas Stark, Heike Gabrisch, F. P. Schimansky, Dilek Halici, Maria Cecilia Poletti, N. Schell, A. Schreyer and Florian Pyczak Large scale forging of an advanced Ti-Al-Nb alloy Publikation in PURE anzeigen
Johannes Tändl, Shoichi Nambu, Angelina Orthacker, Gerald Kothleitner, Junya Inoue, Toshihiko Koseki and Maria Cecilia Poletti In-situ observation of recrystallization in an AlMgScZr alloy Publikation in PURE anzeigen
Peter Mayr, Christian Schlacher and Alexander Nitsche Microstructure-property relationships in creep resistant boron alloyed martensitic Cr steels and their welded joints Publikation in PURE anzeigen
Rudolf Vallant, Fernando Gustavo Warchomicka, Andreas Hütter and Christopher Alois Wiednig Applications of EB and FSP for functional and structural materials Publikation in PURE anzeigen
Andreas Hütter, Wilfried Huemer, Claudia Ramskogler, Fernando Gustavo Warchomicka, Aymen Lachehab, Rudolf Vallant and Christof Sommitsch Surface Modification of pure magnesium and magnesium alloy AZ91 by Friction Stir Processing Publikation in PURE anzeigen
Dilek Halici and Maria Cecilia Poletti Damage analysis in a gamma TiAl alloy during hot working Publikation in PURE anzeigen
Florian Pyczak, Marcus W. Rackel, Heike Gabrisch, Uwe Lorenz, Andreas Schreyer, Dilek Halici and Andreas Stark In-situ monitoring of thermal treatments and hot deformation of a γ-TiAl alloy by high energy X-Ray diffraction Publikation in PURE anzeigen
Norbert Enzinger, Christopher Alois Wiednig and Markus Stütz Elektronenstrahlschweißen am IWS – ein Überblick aktueller Projekte Publikation in PURE anzeigen
Christian Schlacher, Martina Dikovits, Christof Sommitsch and Peter Mayr Evolution of creep damage in MARBN welded joints Publikation in PURE anzeigen
Sebastian Wipfler, Mustafa Kicin, Rudolf Rauch, Jürgen Wagner and Norbert Enzinger FINITE ELEMENT SIMULATION OF HIGH FREQUENCY INDUCTION TUBE WELDING Publikation in PURE anzeigen
Christopher Alois Wiednig and Norbert Enzinger Toughness Evaluation of Electron Beam Welds
Alternativer Link: Link Publikation in PURE anzeigen
Semin Hadžić, Reinhold Hanus and Christof Sommitsch Vorhersage der lokalen Warmrissbildung beim industriellen Stahlguss Publikation in PURE anzeigen
Markus Brillinger, Norbert Enzinger, Franz Haas and Stefan Pfanner Basic Characterisation of 17-4PH structure manufactured by Selective Laser Melting
Alternativer Link: Link Publikation in PURE anzeigen
Ernst Plesiutschnig, Martina Dikovits, Daniel Prodinger, Christof Sommitsch, Stefan Wallner and Günter Zeiler Relation between prior austenite grain size creep rupture life and pore evolution of 9% Cr steels
Alternativer Link: Link Publikation in PURE anzeigen
Angelina Orthacker, Georg Haberfehlner, Johannes Tändl, Maria Cecilia Poletti, Gerald Kothleitner and L.J. Allen Physical and Practical Challenges in Analytical Electron Tomography of Aluminum Alloys Publikation in PURE anzeigen
Christopher Alois Wiednig and Norbert Enzinger Toughness Evaluation of Electron Beam Welds
Alternativer Link: Link Publikation in PURE anzeigen
Maria Cecilia Poletti, Dilek Halici and Song Xue Flow instabilities during hot deformation of titanium alloys and titanium matrix composites Publikation in PURE anzeigen
Claudia Ramskogler, Sepideh Mostofi, Fernando Gustavo Warchomicka, Annelie Weinberg and Christof Sommitsch Osteoblastic cell behaviour on surface structured titanium alloys obtained by electron beam technique Publikation in PURE anzeigen
Angelina Orthacker, Georg Haberfehlner, Johannes Tändl, Maria Cecilia Poletti and Gerald Kothleitner Analytical Electron Tomography of Aluminium Alloys with Nano-Precipitates and its Physical Challenges Publikation in PURE anzeigen
Norbert Enzinger, Peter Loidolt, Christopher Alois Wiednig, Markus Stütz and Christof Sommitsch Electron Beam Welding of thick walled Copper components Publikation in PURE anzeigen
Gerald Trummer, Christof Marte, S. Scheriau, Peter Dietmaier, Christof Sommitsch and Klaus Six Modeling wear and rolling contact fatigue: Parametric study and experimental results Publikation in PURE anzeigen
Ernst Plesiutschnig, Stojan Vujic and Christof Sommitsch Investigations on Precipitation Evolution of MarBN Steels for Microstructure Based Life - Time Assessments
Alternativer Link: Link Publikation in PURE anzeigen
Christopher Alois Wiednig and Norbert Enzinger Toughness Evaluation of Electron Beam Welds
Alternativer Link: Link Publikation in PURE anzeigen
Ernst Plesiutschnig, Rudolf Vallant, Norbert Enzinger and Christof Sommitsch Damage analysis of a cracked low-pressure steam turbine blade
Alternativer Link: Link Publikation in PURE anzeigen
Thomas Spenger, Norbert Enzinger, Ferdinand Hofer, Sanja Simic, Christof Sommitsch and Christopher Alois Wiednig Electron Beam Processing for the Production of Model Alloys
Alternativer Link: Link Publikation in PURE anzeigen

To top

Further Information
image/svg+xml

PURE TU Graz
Contact
image/svg+xml
Institute of Materials Science and Welding
Graz University of Technology
Kopernikusgasse 24/I
8010 Graz - Austria phone: +43 316 873 7181
fax: +43 316 873 7187
officenoSpam@iws.tugraz.at