2024
Efficient Mapping of On-Demand Drive Load Profiles on Inverter Stress
Z. Bosnjic, K. Krischan, F. Koenigseder, A. Loibl and M. Hartmann, "Efficient Mapping of On-Demand Drive Load Profiles on Inverter Stress," PCIM Europe 2024; International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management, Nürnberg, Germany, 2024, pp. 1783-1791
DOI-Link PDF
Design Aspects of a Transformerless Solid-State Transformer Concept Considering Lightning Impulse Behavior
Neuner, D., & Hartmann, M. (2024). Design Aspects of a Transformerless Solid-State Transformer Concept Considering Lightning Impulse Behavior. in 10th International Power Electronics and Motion Control Conference (ECCE Asia - IPEMC 2024)
DOI-Link PDF
2023
Increasing Light Load Efficiency in Phase-Shifted, Variable Frequency Multiport Series Resonant Converters
T. Langbauer, A. Connaughton, F. Vollmaier, Z. Huang, K. Krischan and R. Petrella,
"Increasing Light Load Efficiency in Phase-Shifted, Variable Frequency Multiport Series Resonant Converters," IEEE Access, vol. 11, pp. 92969-92984, Aug. 2023.
DOI-Link PDF
Low-Cost Axial Flux PCB Motor with Ferrite Core and Ferrite Magnet Topology for Fan Applications
S. Asgari, N. Saed and A. Muetze, "Low-Cost Axial Flux PCB Motor with Ferrite Core and Ferrite Magnet Topology for Fan Applications", in Proc. of the IEEE Int. Electric Machines & Drives Conf. (IEMDC 2023), San Francisco, CA, USA, 2023, pp. 1-5.
DOI-Link PDF
Free-Form Rotor Optimization for Synchronous Reluctance Machines used in X-ray Tubes
C. Mellak, A. Cesarano, P. Gangl, J. Deuringer and A. Muetze, "Free-Form Rotor Optimization for Synchronous Reluctance Machines used in X-ray Tubes," in Proc. of the IEEE Int. Electric Machines & Drives Conf. (IEMDC 2023), San Francisco, CA, USA, 2023, pp. 1-7.
DOI-Link PDF
On the Effect of Claw Geometry on the Vibration of Single-Phase Claw-Pole BLDC Machines
N. Saed, S. Asgari and A. Muetze, "On the Effect of Claw Geometry on the Vibration of Single-Phase Claw-Pole BLDC Machines," in Proc. of the 11th Int. Conf. on Power Electronics (ICPE 2023 - ECCE Asia), Jeju Island, Republic of Korea, 2023, pp. 142-147.
DOI-Link PDF
Cost Effective High Power MV Charger Concepts for Highway Charging Stations
D. Neuner and M. Hartmann, "Cost Effective High Power MV Charger Concepts for Highway Charging Stations," in Proc. of the Int. Exhib. and Conf. for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Europe 2023), Nuremberg, Germany, 2023, pp. 1-10.
DOI-Link PDF
Baseline Determination for Drive Cycle Performance Analysis of Permanent Magnet Synchronous Motors
P. K. Dhakal, K. Heidarikani, R. Seebacher and A. Muetze, "Baseline Determination for Drive Cycle Performance Analysis of Permanent Magnet Synchronous Motors," in Proc. of the IEEE Transportation Electrification Conf. and Expo, Asia-Pacific (ITEC Asia-Pacific 2023), Chiang Mai, Thailand, 2023, pp. 1-6
DOI-Link PDF
Baseline Determination for Drive Cycle Performance Analysis of Induction Motors
K. Heidarikani, P. K. Dhakal, R. Seebacher and A. Muetze, "Baseline Determination for Drive Cycle Performance Analysis of Induction Motors," in Proc. of the IEEE Transportation Electrification Conf. and Expo, Asia-Pacific (ITEC Asia-Pacific 2023), Chiang Mai, Thailand, 2023, pp. 1-6.
DOI-Link PDF
Overview of Post-Fault Operation Strategies for Open-End Winding Machines Considering ZSC
A. A. Dawara and A. Muetze, "Overview of Post-Fault Operation Strategies for Open-End Winding Machines Considering ZSC," in Proc. of the IEEE Energy Conversion Congress and Exposition (ECCE 2023), Nashville, TN, USA, 2023, pp. 5067-5073.
DOI-Link PDF
Analysis of a Solid-State Transformer Employing Capacitively Isolated Series-Stacked Converter Cells and a Single Medium-Frequency Transformer
D. Neuner, M. Hartmann, J. W. Kolar and J. Huber, "Analysis of a Solid-State Transformer Employing Capacitively Isolated Series-Stacked Converter Cells and a Single Medium-Frequency Transformer,"in Proc. of the IEEE 24th Workshop on Control and Modelling for Power Electronics (COMPEL 2023), Ann Arbor, MI, USA, 2023, pp. 1-8.
DOI-Link PDF
Down-scaling of drive cycles for experimental drive cycle analyses
P. K. Dhakal, Kourosh Heidarikani and A. Muetze, "Down-scaling of drive cycles for experimental drive cycle analyses," in Proc. of the 12th Int. Conf. on Power Electronics, Machines and Drives (PEMD 2023), Brussels, Belgium, 2023, pp. 271-276.
DOI-Link PDF
Enhancing PCB Motor Performance through Phase Resistance Reduction in Slotted PCB Motors with Ferrite Core
S. Asgari, N. Saed and A. Muetze, "Enhancing PCB Motor Performance through Phase Resistance Reduction in Slotted PCB Motors with Ferrite Core", in Proc. of the 26th Int. Conf. on Electrical Machines and Systems (ICEMS 2023), Zhuhai, China, 2023, pp. 3780-3784
DOI-Link PDF
A Novel Test Method for Switching Loss Measurement of Reverse-Blocking Semiconductor Switches in Current-Source Inverters
B. Riegler and A. Mütze, "A Novel Test Method for Switching Loss Measurement of Reverse-Blocking Semiconductor Switches in Current-Source Inverters," in Proc. of the 11th Int. Conf. on Power Electronics and ECCE Asia (ICPE 2023 - ECCE Asia), Jeju Island, Korea, Republic of, 2023, pp. 2619-2625
DOI-Link PDF
GriDConv – control, design, and experimental verification of a lab-scale high-voltage DC-DC converter
B. Riegler, K. Krischan, M. Hartmann and M. Reichhartinger, “GriDConv – control, design, and experimental verification of a lab-scae high-voltage DC-DC converter.” Elektrotechnik & Informationstechnik, vol. 140, no. 1, pp. 45–56, Feb. 2023.
DOI-Link PDF